Angularity

ANGULARITY, PARALLELISM AND PERPENDICULARITY

The angularity (including parallelism and perpendicularity) tolerance is the total deviation between two planes within which the entire surface so toleranced must lie. The planes of deviation (tolerance zone) forms the basic angle to the datum plane. Tolerances are for draft free surfaces (see Draft standard). To establish planes see Flatness standard.

ANGULARITY
Angularity refers to the angular departure from the designed relationship between the elements of a casting. The angularity of cored holes may vary as a result of distortion and wear of core boxes. (Cored holes must conform to the diameter-to-depth ratios of the Holes and Pockets standard.)
Up to 3 in. depth .030
Additonal depth over 3 in. .007 in./in.

      St Paul Brass and Aluminum Foundry   -   954 West Minnehaha Avenue, St. Paul, MN 55104 - (651)488-5567 - (800)348-1649 -   Fax: (651)488-0908
      E-mail us for Free Video and Free Casting Design and Alloy Selection Guide or To Discuss Your Casting Project

St. Paul Brass and Aluminum Foundry is a charter honoree of the Inc 5000: